How to Use PEACH Cooling Prep Gel with Your IPL Device for Comfortable Treatment

If you’re new to at-home IPL hair removal, you might be wondering how to make each session as comfortable as possible. The good news is that the right preparation can make a world of difference. One of the best-kept secrets in the IPL world is using a dedicated cooling gel before your treatment. The PEACH Cooling Prep Gel is designed specifically to prep your skin for IPL, reducing discomfort and helping the device glide smoothly.

In this guide, we’ll walk you through exactly how to use PEACH Cooling Prep Gel with your IPL device, from prepping your skin to post-treatment care. Whether you’re using the Peach 2 or another IPL device, these steps will help you achieve smoother, more comfortable sessions.

Why Use a Cooling Prep Gel for IPL?

IPL devices work by emitting intense pulses of light that are absorbed by the melanin in your hair follicles. While this is highly effective, the heat generated can sometimes cause a stinging or snapping sensation on the skin. A cooling gel like PEACH Cooling Prep Gel acts as a barrier, absorbing some of the heat and soothing the skin during the flash.

Moreover, the gel creates a smooth surface for the IPL device to glide over, ensuring even contact and more consistent results. It also helps to cool the skin immediately after the pulse, reducing redness and irritation. In short, using a prep gel is a simple yet powerful way to enhance your IPL experience.

• Reduces discomfort during each flash
• Helps the device glide smoothly over the skin
• Minimizes post-treatment redness and irritation
• Improves light absorption for better results

Step-by-Step: How to Apply PEACH Cooling Prep Gel

Before you begin, make sure your skin is clean, dry, and free of any lotions, oils, or makeup. Shave the area you plan to treat 24 hours in advance, as this allows the light to target the hair follicle directly without surface hair interfering.

Squeeze a generous amount of PEACH Cooling Prep Gel onto your fingertips and apply a thin, even layer to the treatment area. You don’t need a thick coat—just enough to cover the skin without leaving puddles. The gel should feel cool and refreshing on contact.

Once applied, turn on your IPL device and follow the manufacturer’s instructions. Glide the device over the gel-covered skin, ensuring each area receives a single pulse. The gel will help the device move smoothly and reduce any pulling or tugging. After treatment, you can wipe off any excess gel with a damp cloth or rinse it off in the shower.

• Always shave 24 hours before IPL to avoid surface hair burning
• Use a thin, even layer of gel—more isn’t always better
• Glide the device slowly to ensure full coverage
• Avoid applying gel to broken or irritated skin

Tips for Maximizing Comfort During IPL Sessions

Even with the cooling gel, some areas of the body are more sensitive than others. For instance, the underarms and bikini line may be more tender than the legs. To further reduce discomfort, you can chill the PEACH Cooling Prep Gel in the refrigerator for 15-20 minutes before use. The cold sensation helps numb the skin slightly, making the pulses feel less intense.

Another tip is to use the lowest energy setting on your IPL device for the first few sessions, then gradually increase as your skin becomes accustomed. This is especially important if you have a low pain tolerance. Pairing the gel with a high-quality device like the Peach 2 can also make a difference, as advanced devices often feature skin-sensor technology that adjusts the light intensity based on your skin tone.

Finally, remember to moisturize after your session. The cooling gel can leave your skin feeling refreshed, but a gentle moisturizer will help maintain hydration and soothe the skin further. For an extra boost, consider using a barrier-restoring mist like the SUPERCHARGED Barrier Restoring Essence Mist, which helps calm and strengthen the skin post-treatment.

• Chill the gel in the fridge for extra cooling effect
• Start with a lower energy setting and increase gradually
• Use a moisturizer after treatment to keep skin hydrated
• Consider a barrier-restoring product for sensitive skin

Common Mistakes to Avoid When Using IPL Cooling Gel

One common mistake is applying the gel too thickly, which can actually block the light from reaching the hair follicle. Always aim for a thin, even layer. Another mistake is using the gel on unshaven skin—this can cause the light to be absorbed by the hair above the skin, leading to burns and ineffective results.

Also, don’t skip the patch test. Even if you’ve used IPL before, always do a patch test with the gel on a small area to ensure you don’t have an adverse reaction. And never use the gel on broken, sunburned, or irritated skin. If you have any underlying skin conditions, consult your dermatologist first.

• Don’t apply a thick layer of gel—it blocks light
• Always shave before using IPL, even with gel
• Perform a patch test with the gel on a small area
• Avoid using on irritated or sunburned skin

Using PEACH Cooling Prep Gel is a game-changer for anyone looking to make IPL hair removal more comfortable and effective. By following the steps above, you can enjoy smoother, less painful sessions and better results. If you’re ready to upgrade your IPL routine, explore the Peach 2 device and experience the difference a quality IPL system can make.